LMA Ytterbium doped tapered fiber
YDF-DC-40/400-PM-TPR-2.5-A
Large mode area ytterbium doped double clad polarization-maintaining tapered fiber YDF-DC-40/400-PM-TPR-2.5-A series is designed for operation without any power degradation in extremely high-peak-power cladding-pumped amplifiers. The new tapered fiber design has a single-mode end (typical dimension is 8/80 µm) for signal input and a very-large-mode-area end (typical dimension is 40/400 µm) for signal output and pump input. The all-glass double-clad fiber design (based on highly F-doped second cladding with typical NA=0.26) allow simple polishing of the thick 400 µm fiber end. Due to a high Yb concentration and a short tapered fiber length amplifiers based on this fiber has the highest threshold of nonlinear effects over the market (up to 0.5 MW) together with the diffraction limited beam quality at the output.

 

FBG CHARACTERISTICS

ARTICLE GTL-FBG-TL-860

Wavelength range, nm600÷ 2300± 0.1 ÷ ± 1 custom request
Types of fiberSingle-Mode, PM, Double clad, LMAor custom
Wavelength to quick order, nm633, 780, 794, 797, 799, 801, 809, 830, 852, 895, 940, 976, 1030, 1057, 1060, 1064, 1080, 1125, 1150, 1178, 1240, 1270, 1310, 1484,1510 ÷ 1580, 1650, 1900, 1908, 1952, 2300± 0.1 ÷ ± 1 custom request
Tilt angle, °1 ÷ 45custom request
Reflectivity, %5 ÷ 992 ÷ 5 custom request
Bandwidth (WFHM), nm0.1 ÷ 0.8custom request
FBG Length, mm1 ÷ 20custom request
SLSR, dB~ 8custom request
FBG Pigtail Length, m≥ 0.5or custom
FBG RecoatingNone, Acrylate, Polyimide, Aluminium, Copperor custom
Tensile Strength, kpsi› 100
Optical ConnectorBare fiber, FC/APC, LC/APCor custom
Other parameters are available on the request
Don't know the parameters? Ask us a question!
Ask a question
Just type your contacts and message
GREITLEX 2018© | All Right Reserved.
Close
Made on
Tilda